Grilles de sécurité PS-OFF

SATECH, a specialist in machine guarding, presents the BlueGuard modular guarding system. It is the result of twenty years of experience of Satech in the field of safety in the workplace. It combines safety, flexibility and compliance with the high hygiene standards required by the food, chemical and pharmaceutical industries. With these frameless panels made of 4 mm wire reinforced with stiffening ribs in passivated AISI 304 stainless steel, the panels are attached to open section posts, which are fully inspectable, thanks to a captive quick-fix system made of technopolymer and stainless steel. lueGuard is quick to assemble: only one type of post is needed for the assembly of straight lines, corners or doors, saving a lot of time. The large reinforcing folds make it easy to use a power screwdriver, while the absence of a frame allows for quick adjustment of panel size during assembly. Benefits and features: Durable: - Resistant to high pressure washing - Corrosion resistant. Easy maintenance: - Fully inspectable - Prevents dirt build-up - Allows cleaning of adjoining areas. Safe: - Ecolab tested and certified. Robust: it allows for quick and efficient installation thanks to a simple and easy to use fixing system that fits perfectly to the poles, while the perimeter can be easily adjusted to meet the configuration requirements of the industrial equipment. - AISI 304 stainless steel and technopolymers to ensure high resistance, even to high-pressure washing - High resistance 4 mm diameter steel wire, with reinforcing folds - The mounting of the fastening system in the reinforcing folds gives even more resistance and stability. Practical: Fully adaptable: The frameless construction allows the width of the panels to be adjusted directly during assembly. Captive fastening system: Easy to assemble and consisting of two pre-assembled parts for quick and captive assembly EN ISO 14120. Technical specifications: Panels: - Mesh: 32 x 68 x 4 mm - Height: 2080 mm - Widths: 484, 996, 1476, 1988 mm. - Materials - panels and posts: High quality AISI304 stainless steel. Posts - Universal (for straight and corner mounting), U-shaped section for drainage, 60x60 - Feet: TIG welded with 4 floor fixing points - Height: 2240 mm. - Materials - Technopolymer: Food contact DOMAMID® 6G30FC.

SATECH, specialist in machine guarding, presents the STRONG/HEAVY Series industrial machine guarding systems. The STRONG/HEAVY Series modular guarding consists of 60x60 posts with a welded base and 20x20 and 30x30 framed panels assembled together using a Satech patented quick-release CLIP. The series is used in so-called heavy conditions, such as in industrial robotics or the steel industry. STRONG/HEAVY Series panels: Characteristics: - Frame: 20 x 20/ 30 x 30 - Mesh: 22 x 100 x 3 - Paint: Epoxy-polyester powder (for indoor use). Dimensions : - Bases: 200, 300, 700, 800, 1000, 1200, 1500 - Heights: 1500, 1900, 2080, 2480, 2860. STRONG/HEAVY series posts: Characteristics: - Posts: 60 x 60 x 2 - Base: Welded with 4 anchor points - Varnish: Epoxy-polyester powder (for indoor use only). Dimensions : - Posts: 1660, 2060, 2240, 2640, 3035. Colours: Panels and posts are painted with epoxy-polyester powder (for indoor use only) in the "standard" colours RAL 9005 and 1021 or 7035. Non-standard colours can be produced on request to meet any special requirements. All our products comply with European standards (International Standard EN ISO 14120 "General requirements for the design and construction of fixed and movable guards", International Standard EN ISO 13857).

Satech presents the "LIGHT" version of the manual vertical door. The new Manual Vertical Door is equipped with a counterweight that allows the control of the opening and closing movement and an actuation whose power does not exceed 150N. The double safety cable on the restart, the magnetic stop and the very strong posts make it fully compliant with the safety regulations. Finally, the reduced number of components makes assembly quick and easy.